|
SPLICE KIT HOME |
INSTALLATION SEQUENCE |
INSTALLATION GUIDE
(PDF-19kb) |
EXPANSION INFO. |
STEP 1: Turn
the support rails so the bottom is facing up
|
STEP 2: Place
the lower splice extrusion over the
rails
to use as a template
|
STEP 3: Center
the lower splice extrusion
over
the rails and mark using a small felt pen
|
STEP 4: Drill
two holes using a 1/2 #10 Uni-Bitฎ -drill
at the intersection of the reference mark and the
extruded V groove in the lower support assembly
|
STEP 5a:
Insert the splice into the channel |
STEP 5b |
STEP 6: Place
the lower support over the bottom of
the support rail align to the drilled holes
|
STEP 7: install
the two 5/16 bolts / lock washers
into
the center splice
|
STEP 8: Tighten
using a 1/2 socket
|
INSTALLED SPLICE KIT |
|
EXPANSION FEATURE! |
 |
EXPANSION FEATURE MODIFICATION:
Assemble the sections together allowing a 3/16 gap between
sections.
After
installing the supports remove one of the 5/16 bolts
|
