|
 
TILE TRAC® is a perfect solution for the
following photovoltaic (PV) mounting applications:
1) S-Curved concrete tile roofs
(VIDEO)
2) Surface mount for pitched composition
shingle roofs
3) Surface mount for flat roofs
PATENT #5,746,029
Installation Guide (PDF)
Brochure
(CLICK IMAGE FOR LARGER VIEW)
The TileTrac was designed to provide a
10 square inch base to spread the load for top-mounted installations
without trapping water and/or debris on the roof.
The TileTrac also provides enough space
(3" with the short stud on a flush mounted project) between the module and
the roof to ensure the roof and modules can "breathe" properly. |
The Tile
Trac® with a tile roof.
Photo courtesy of Advanced Solar Electric
The Tile
Trac® keeps a low 3" profile to composition roof-tops.
Photo courtesy of Advanced Solar Electric,
|
|
As illustrated to the left, the TileTrac®
creates a more safe and structural way to attach the Roof Trac™ system
to a tile roof. Because the weight of the system is shifted off the tile
and onto the rafter, there is a significantly reduced chance of broken
tiles. Plus, the Tile Trac allows the installer to adjust the height in
the array to compensate for un-even roof-tops.
|
|
DESIGNED TO INTEGRATE WITH THE ROOFTRAC
MOUNTING SYSTEM
The TileTrac® attachment system is fully
integrated with our aluminum "C" channel to conceal hardware
inside the channel. For both tile and composition roof-tops. Attachments
look clean and professional.
Photo
illustrates a long stud to the
left. Normally this application is for installation on a tile roof.
The lower application to the right
illustrates how the TileTrac is used as a top-mount on a pitched
composition roof. This installation technique keeps the modules lowest to
the roof for an aesthetically pleasing array while maintaining proper air
flow and drainage standards. |
